http://uv-lamp-plus.com/en/tags/sleeves/ Recent content in Sleeves on UV Lamp Plus Hugo en-us Sat, 23 May 2026 00:19:31 +0800 http://uv-lamp-plus.com/en/posts/sleeves-for-uv-sterilization-lamp/ Sat, 23 May 2026 00:19:31 +0800 http://uv-lamp-plus.com/en/posts/sleeves-for-uv-sterilization-lamp/ <p><img src="http://uv-lamp-plus.com/images/0dd95a3f92743bdf73543e1064563e4d.png" alt="Sleeves for UV sterilization lamp"></p> <h1 id="uv-sterilization-lamp-sleeves-the-real-world-specs-that-matter">UV Sterilization Lamp Sleeves: The Real-World Specs That Matter</h1> <p>We make sleeves for UV sterilization lamps—basically, a plug-and-play heat shield and bodyguard for the quartz tube. The whole point? It slips in, matches your lamp’s power, size, and wiring setup, and you’re off and running—no chamber redesign needed.</p> <h2 id="power-voltage-and-dimensionskept-practical">Power, Voltage, and Dimensions—Kept Practical</h2> <p>UV lamps throw off serious heat, so the sleeve has to manage that without choking the UV output. We size the sleeve length to <a href="https://goldisgood.com">match</a> common lamp lengths—think 300mm, for example—and set the bore so the lamp stays centered and stable. Voltage ratings like 400V are chosen to handle that initial ignition surge and then keep things steady once the lamp is running, especially with medium-pressure UV lamps. High wattage—say, 2500W—gives you the intensity needed for fast sterilization, but it also means serious heat density. Plan your cooling and spacing up front. If you squeeze it into a tight box, you’re asking for trouble—lamp life will drop fast.</p>